The moisture resistant plasterboard comes in 1200 x 2400mm standard panel size, has a noncombustible gypsum core that is enclosed in a sturdy natural-finish paper on the face side and a sturdy liner paper on the reverse. The moisture resistance of the gypsum core is enhanced by the use of specific chemicals that provide a better resistance to water penetration. The face paper is folded over the long edges to reinforce and safeguard the core. The ends have a clean finish and a square cut. Long edges of panels are recessed (tapered), allowing joints to be strengthened and concealed with a joint treatment.

Covered with green cardboard on face side & green or grey cardboard on the back side with green edge tape.

The Moisture Resistance gypsum wallboard is used as a covering material for interior walls and ceilings in residential and commercial applications that often require specific moisture or water rated assemblies.

The board-maintained water absorption below 10% according to the EN-520 Standards. Moisture resistant also can be produced below 5% according to ASTM 1396 / 1396 M

Available size: 1200*2400mm or 3000mm

Thicknesses: 9.5mm/12.5mm/15mm

Available brands: USGME Skyrock, UMI Gypsum, G board & MADA